Showing posts with label lamp boxes. Show all posts
Showing posts with label lamp boxes. Show all posts
Thursday, August 21, 2014
Reviews of Round Bouilotte Lampshade in Taupe (Type 22 - 120 in. Diam x 12 in
They say buying a lampshade without the lamp is like buying a hat without a head. Thanks to trustworthy measurements, the shade fits perfectly. It arrived securely wrapped and in good time.
Wednesday, July 30, 2014
Pretty Pineapple Tiffany Table Lamp -1469 Review
I LOVE this lamp. My husband and I enjoy Tiffany lamps, especially unique ones. We purchased this and put it on our hutch to welcome guests as they come in. We continually received compliments. This is a perfect little accent light.
Monday, May 26, 2014
Cheap Thomas Lighting SL710615 Homestead Bath Light, Oiled Bronze
Tuesday, February 11, 2014
Cheap Fanimation F DR1-48 48" Downrod with 1 Inch Diameter, Oil Rubbed
Although I ended up returning it and getting a shorter one. You'll want a 14 foot ceiling to use this. I miscalculated when I didn't take the length of the fan itself into account; that made the fan about 10 inches too low.
Tuesday, December 31, 2013
Cheap Quoizel NY8316Z Newbury Light Outdoor Wall Lantern, Medici Bronze
Customer Ratings: 
List Price: $117.00
Sale Price: $77.99
Today's Bonus: 33% Off

Great lantern for the money, quality very well made. Have installed over twenty of then in past in various finishes. Would not hesitate to purchase another one any time soon.
They are easy to install and have an expensive look and feel. They are of medium size so they look substantial but not big.
It mounts with the fairly standard X bracket that you screw onto the outlet box and then mount the fixture onto the two protruding screw studs.
The screw studs are about an inch long and they are designed to be adjustable to you can screw them in or out of the mounting bracket so that they only protrude about a 1/4" through the light fixture mounting plate.
For my installation when the mounting screws were adjusted they went too far back and hit the sides of the outlet box. I solved the problem by buying two 8-32 1/2" stainless steel screws and used them to replace the longer screws. When fully screwed into the back of the X bracket they protruded exactly right for the textured nuts that hold the fixture onto the bracket.
And while you are at the hardware store buy some wire nuts for 12-14 gauge wire (you need two per fixture) because the fixture does not come with any. The instructions also recommend you put some clear silicone sealant on the fixture mounting screws to make a water proof seal at the mounting nuts. They also recommend putting a small bead of caulk around three sides on the mounting plate (none at the bottom to allow ventilation) which is a must if the unit will get wet.
It probably took about 7 minutes to install each fixture. I used the new warm white LED light bulbs at are equal to 40W incandescent bulbs but use a fraction of the electricity and last for many years.
List Price: $117.00
Sale Price: $77.99
Today's Bonus: 33% Off
Great lantern for the money, quality very well made. Have installed over twenty of then in past in various finishes. Would not hesitate to purchase another one any time soon.
Click Here For Most Helpful Customer Reviews >>
I put two of these a the front door of a two story colonial home and they looked so nice I ordered two more for the garage.They are easy to install and have an expensive look and feel. They are of medium size so they look substantial but not big.
It mounts with the fairly standard X bracket that you screw onto the outlet box and then mount the fixture onto the two protruding screw studs.
The screw studs are about an inch long and they are designed to be adjustable to you can screw them in or out of the mounting bracket so that they only protrude about a 1/4" through the light fixture mounting plate.
For my installation when the mounting screws were adjusted they went too far back and hit the sides of the outlet box. I solved the problem by buying two 8-32 1/2" stainless steel screws and used them to replace the longer screws. When fully screwed into the back of the X bracket they protruded exactly right for the textured nuts that hold the fixture onto the bracket.
And while you are at the hardware store buy some wire nuts for 12-14 gauge wire (you need two per fixture) because the fixture does not come with any. The instructions also recommend you put some clear silicone sealant on the fixture mounting screws to make a water proof seal at the mounting nuts. They also recommend putting a small bead of caulk around three sides on the mounting plate (none at the bottom to allow ventilation) which is a must if the unit will get wet.
It probably took about 7 minutes to install each fixture. I used the new warm white LED light bulbs at are equal to 40W incandescent bulbs but use a fraction of the electricity and last for many years.
Tuesday, November 26, 2013
Review of Crackle Glass Mermaid Accent Table Lamp
This lamp is a lot more impressive in person than online. It's base and upper sculpture are made of resin but look and feel completely like bronze. You can only tell it's resin when you pick it up. The glass is absolutely gorgeous when lamp is on, and yet it is still very attractive while the lamp is off. Can't say enough great things about it!
Lamp arrived in double layer packing making it virtually impossible to break during shipment. The lamp was first packed in a custom form-fitted styrofoam enclosure securely keeping it cushion and immobile, which in turn was placed into a correctly sized box. That box was then nestled in a larger box cushioned with styrofoam peanuts. In essence, the inner box was adequately shielded from all but the worst case shipping accident scenarios.
Click Here For Most Helpful Customer Reviews >>
Seriously though, I love the lamp and so does my wife. I selected it because of the combination of the blue/green glass tail as each color represents one of us, (I am green, she is blue). As an accent piece, it is perfect for out space and it makes a great night light too. I'll be hooking it up to a lamp timer so that it will automatically turn on during times when I'm around. Yes, I know, lazy but it works. The lamp uses as standard night light bulb, but I'll be replacing that with a LED shortly.Lamp arrived in double layer packing making it virtually impossible to break during shipment. The lamp was first packed in a custom form-fitted styrofoam enclosure securely keeping it cushion and immobile, which in turn was placed into a correctly sized box. That box was then nestled in a larger box cushioned with styrofoam peanuts. In essence, the inner box was adequately shielded from all but the worst case shipping accident scenarios.
Friday, November 22, 2013
Reviews of Capital Lighting 1164MN-118 4-Light Vanity Fixture, Matte Nickel
We would recommend this vanity light. We had no problem installing it in our new bathroom. We are very pleased with it's appearance and would recommend it to a friend.
Subscribe to:
Posts (Atom)