List Price: $110.00
Sale Price: $85.90
Today's Bonus: 22% Off
Installed ten of these in a 1/2" drywall ceiling. Used a 3-1/8" hole saw. They are short enough to fit if the ceiling has 2x6 joists. The electrical box works best with romex if you punch out the knockouts and use a romex strain relief. That way the wires are secured better as you work the unit into the hole.
Snap-in eyeball housing holds the GU-10 lamp easily and securely and allows aiming. I replaced a few of the included 50-watt halogen lamps that run very hot with 6-watt 3-LED CREE MR-16 lamps that produce almost no heat but put out the same illumination. Very nice.
These come with white painted trim. The tiny units make my old 6" can lights look really clunky and old fashioned. The new generation of miniature LED lamps will mean totally redesigned and more compact ceiling lights.
Click Here For Most Helpful Customer Reviews >>
Very happy with the lights, easy install, compact profile, work great.Some details -
Use a 3.25" hole saw (the included template is metric & translates to 3.2" technically). A 3-1/8 will work but is tight enough that removal could damage the drywall.
These are NON-IC, meaning insulation must be moved 3" away from the housing so they can vent heat properly.
The included halogens provide a warm, yellow natural light with moderate dispersion. Other options are LED (whiter light, lower dispersion) or CFL (less white than LED, more than halogen, best dispersion but slow 60 sec warm-up time). The CFL & LED use about 90% less electricity than the halogens.
NOT for wet locations like a shower. Bathroom is OK everywhere but in the shower.
Best Deals for Canarm RN3NRC1WH6C Recessed Lights Kit, Includes Six Single Bulb
these were just what our kitchen needed! Easy to install, easy to replace the stock halogens with LED bulbs, by the way, the height of the bulb does not matter in this fixture! I was so stressed trying to figure out which bulb to order and seeing all these nightmares about the bulbs not fitting...no need to worry with this, it will fit any height as the cover is what is holding the bulb.I couldn't find a 3-1/8" hole saw, so I used a 3" and made the hole a little wider with a box cutter...pretty easy. You want these to fit snug anyway. I don't use the directional feature as I surrounded my island with all 6...no need to turn any of the bulbs. it is so bright!!
Honest reviews on Canarm RN3NRC1WH6C Recessed Lights Kit, Includes Six Single Bulb
We bought these as part of a remodel project of the dining room and bar. I originally bought a track light but changed my mind when I saw these. They are in a drop ceiling over the bar and are connected to a dimmer switch to create the right amount of light for the occasion. Lights arrived on time and in good condition. I already had power above the drop ceiling so using that I ran romex 14 gauge wire to the first one and then daisy chained the rest. each light has it's own electrical connection box. I installed these into wood using a 3 1/8 hole saw but had to grind it out a little so a 3 1/4 probably would have been a better choice. I am using the 50 watt halogen bulbs that came with the lights, they can be replaced with LED's with the U10 base which cost more than halogen but use much less power and have longer life (6 watts v 50) for the same amount of light. If you choose this option and use a dimmer be sure the dimmer is certified to work with LED's or it may not work due to their low power draw.Find helpful customer reviews and review ratings for Canarm RN3NRC1WH6C Recessed Lights Kit, Includes Six Single Bulb
Great lamp very bright love the look 3inches is the way to go . Will recommend to some one.Bought 12 looking to buy 12 more
No comments:
Post a Comment